Watch Winder - Classic Pine

Transparency on Product Origin

The majority of products available on the French market are manufactured in China and offered by various resellers. When a product has a different origin or is made elsewhere, this information is clearly stated on its product page. This is particularly the case for several items from brands featured in our store.

Watch winders are compatible with most watch straps and dials. If there is a risk that the winder may be too small, this will be clearly stated on the product page.

An automatic watch requires an average of 600 turns per day. The older your watch is, the more daily rotations it may need. For a new watch, 500 turns per day is usually more than enough.

How does a watch winder work?

A watch winder simulates wrist movement to keep an automatic watch running.

Principle:

An automatic watch winds itself through an oscillating weight (rotor) that spins when the watch is in motion.

The winder uses an electric motor to rotate a support (cushion) on which the watch is mounted.

This movement activates the rotor, which winds the mainspring — keeping the power reserve intact.

Technical features:

• TPD (Turns Per Day): Number of programmed rotations per day. A quality winder offers various settings, typically between 300 and 1200.
  
• Direction of rotation: Clockwise, counterclockwise, or alternating. Each movement has its own preferences (some only wind in one direction).
  
• Cycles: The motor operates intermittently, with rest periods to prevent overwinding.
  

How to use it:

1. Place your watch on the winder’s cushion.
   
2. Set the mode (TPD + direction).
   
3. The winder automatically runs its cycles (e.g. 3 minutes of rotation every hour).
   

Result: Your watch stays wound and on time, even when not worn.

Une montre automatique peut rester en permanence sur un remontoir, mais ce n’est pas obligatoire. Points clés :

• Utilité du remontoir : il maintient la montre à l’heure et garde les huiles de lubrification légèrement en mouvement.
  
• Risque d’usure : très faible, car un bon remontoir est réglé avec un nombre limité de tours/jour (TPD). Une montre portée au poignet subit souvent plus de rotations qu’un remontoir.
  
• Durée recommandée :
  
  Usage pratique → laissez la montre dessus quand vous ne la portez pas, surtout si vous alternez plusieurs montres.
  
  Usage ponctuel → 1 à 2 jours avant de la remettre au poignet suffisent pour la relancer.
  
  
• Paramétrage : adapte le nombre de TPD et le sens de rotation à ton mouvement (souvent 600–900 TPD, bidirectionnel pour ETA/Valjoux, par exemple).
  

En résumé : vous pouvez laisser votre montre sur le remontoir en continu sans souci, à condition que le remontoir soit réglé correctement.